seo standard


Floating floor system

Thermotech's Floating floor system consists of expanded polystyrene (EPS/Styrofoam) floor panels installed on top of the existing floor. Suitable for both renovations and new-builds.

Effective heating with Thermotech Floating floor system
Thermotech Floating floor system is installed on top of the existing floor. The floor panel in our Floating floor system consists of expanded polystyrene (EPS/Styrofoam) with very high compression strenght to enable thin floor coverings. With a thin floor covering the isolation effect above the underfloor heating is minmized and a lower temperature is required to heat the floor surface.

Thermotech Floating floor system is available in different c/c-measurements. To get an even temperature the panels are laid with a closer c/c-measurement in perimeter zones with a high heat requirement, for example around multiple large windows.

Heat conducting aluminium plates (0.5 mm) are used to transfer heat from the underfloor heating pipes to the floor covering. The aluminium plate has circle shaped raised rims which enhances the contact between the pipe and the plate and makes the heat transfer between the plate and the floor covering very effective.

Comprehensive Floating floor assortment
Our Floating floor system is avaliable in a thickness of 9 mm (Minifloor 8), 14 mm (for 12 mm pipes) and 18, 30, 50 or 70 mm (all for 17 mm pipes). Which thickness is most suitable depends on the projects isolation need and available building height.

All Thermotechs Floating floor systems are suitable for both renovations and new-builds

Minifloor 8 Floating floor is suitable for small areas up to12 m2 where low building height is needed. Floating floor 14 and 18 also have a low building height, but is suitable for larger areas. When a thin Floating floor system is installed it is important to ensure that the existing isolation is sufficient. Floating floors with 30, 50 and 70 mm thickness is used when the existing isolation is insufficient or additional isolation is needed.

To ensure an effective underfloor heating system we always pe produce a detailed CAD blueprint for every project, where boards and loops are shown. A sizing schedule with adjustment values for the underfloor heating manifold are also included in each delivery.

In the box