seo standard


Mixing unit TMix M

Mixing unit TMix® M is suitable for areas up to 200 m² at new productions, renovations or additions

TMix®M is suitable for areas up to 200 m². The mixing unit can be directly connected to Thermotech underfloor heating manifolds. It provides a compact installation when the system has radiators for other areas.

Mixing unit TMix® M are available in two basic models:

  • Manual – with hand knob
  • Constant – the flow temperature is limited to a maximum temperature using an external sensor

Mixing unit TMix®M in stainless steel features low weight and clean design, which enables simpler and more attractive instal­lation. The first-rate raw materials guarantee good rust protection and high resistance to pressure. It has an energy efficient circulation pump (A-class).

Mixing unit TMix® M has the following basic equipment:

  • Circulation pump with cable and plug
  • Integrated flow control valve
  • Thermostatic valve Ri15
  • Return valve Ri15
  • “J” pipes
  • Integrated bypass with control valve
  • Manual air vent
  • Probe for external sensor

The mixing unit TMix® M is always delivered fully assembled and equipped according to the order.

Extra equipment for mixing unit TMix® M
To control the flow temperature that the mixing unit produces, TMix® M can be equipped with four different control and regulation packages depending on the needs. The packages must be ordered at the same time as the mixing unit, since post-installation is not possible.

For small surfaces (up to 12 m2) the mixing unit can be supplemented with a 350 W immersion heater to maintain a comfortable floor temperature for floor surfaces up to a maximum of 12 m2 (29 W/m2) during the months of the year when the ordinary source of heating is shut off. The immersion heater is intended for clinker floors and maintains an average temperature on the floor of 25 ± 1.5°C.

When there is need for a compact installation with an underfloor heating manifold in combination with a mixing unit TMix M, the Thermotech Integral can be a good alternative. It is a fully as­sembled underfloor heating manifold with an integrated mixing unit TMix®M available from 2 to 10 loops.

Shunt TMix M

In the box