Filling station
Small and portable filling station for filling of systems for solar heating, heat pumps, floor heating and other water-borne heating systems.
The filling station fills the system at the same time as bleeding is conducted. The pump has an antifreeze resistant impeller pump with a replaceable impeller.
The station has inflatable rubber wheels and a telescopic handle for adjustment of the height, between 78 and 110 cm. The accompanying hoses are temperature resistant up to 100ºC and are equipped with shut-off valves at the ends.
The valves ensure that the hoses are always filled so that no air is pumped into the system when filling and that no leakage occurs during shipping.
With the transparent filter cup, any air can be seen that may still be in the system.
Dimensions
| Height | 800 mm |
| Depth | 500 mm |
| Width | 400 mm |
Tekniska fakta
| Connections, filling hose | 3/4-inch int. Eurokonus |
| Maximum flow rate | 30 litres per minute |
| Max. pressure | 5 bar |
| Max. temp | 900°C |
| Motor | 230V/50 Hz med 2 m anslutningskabel |
| Weight | 21 kg |
| Tank | UV-beständig PE-tank, 30 liter |
| Output | 370 W |
Product ID
| 81950 | Filling station |
